2.24 port (for 2910 series only)
This command allows users to set the speed for specific port of the router.
port [1,2,3,4] [AN, 100F, 100H, 10F, 10H, status]
Syntax Description |
|
1,2,3,4 | It means the number of LAN port. |
AN… 10H, status | It means the physical type for the specific port. |
| AN: |
| 100F: 100M Full Duplex. |
| 100H: 100M Half Duplex. |
| 10F: 10M Full Duplex. |
| 10H: 10M Half Duplex. |
Example |
|
>port ?
%%port <1,2,3,4> <AN,100F,100H,10F,10H,status>
>port 1 AN
Telnet Command Reference Guide V1.1 | 123 |
