2.21.3 adsl status
This command can display the link status of the ADSL router and the basic information between router and CO.
Example
>adsl status |
|
|
|
| |||
|
| ||||||
Running Mode | : | T1.413 |
| State | : HANDSHAKE | ||
DS Actual Rate | : | 0 bps | US Actual Rate | : | 0 bps | ||
DS maximum Rate | : | 0 bps | US maximum Rate | : | 0 bps | ||
DS Path Mode | : | Interleave | US Path Mode | : | Interleave | ||
NE Current Attenuation | : | 0.0 | dB | Cur SNR Margin | : | 0.0 | dB |
DS actual PSDM(C) | : 00000000 | US actual PSDM(R) : 00000000 | |||||
ADSL Firmware Version | : E.38.2.23 |
|
|
|
| ||
|
| ||||||
Far Current Attenuation | : | 0.0 | dB | Far SNR Margin | : | 0.0 | dB |
CO ITU Version[0] | : 00000000 | CO ITU Version[1] : 00000000 | |||||
DSLAM CHIPSET VENDOR | : < Unknown > |
|
|
|
| ||
INTL, | DSTREAM bytes/depth= | 0, symbols/codewords | = | 0, latency= 0*0.25ms. | |||
, | USTREAM bytes/depth= | 0, symbols/codewords | = | 0, latency= 0*0.25ms. | |||
CODE, | DSTREAM fast parity bytes= | 0, fast codeword= | 0. | ||||
| DSTREAM intl parity bytes= | 0, intl codeword= | 0. | ||||
CODE, | USTREAM fast parity bytes= | 0, fast codeword= | 0. | ||||
| USTREAM intl parity bytes= | 0, intl codeword= | 0. | ||||
Setting>> |
|
|
|
|
|
| |
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3. | |||||||
Running>> |
|
|
|
|
|
| |
FDQ : | Off, TCM : | Off, EC : | Off. |
|
| ||
DS : Framing Mode 3, US : Framing Mode 3.
ADI ADSL Firmware Version: E.38.2.23
Telnet Command Reference Guide V1.1 | 89 |
