Srv dhcp public | Draytek 1.11 specification

2.14.1.14 srv dhcp public

This command allows users to configure DHCP server for second subnet. srv dhcp public start [IP address]

srv dhcp public cnt [IP counts] srv dhcp public status

srv dhcp public add [MAC Addr XX-XX-XX-XX-XX-XX]

srv dhcp public del [MAC Addr XX-XX-XX-XX-XX-XX/all/ALL]

Syntax Description
start	It means the starting point of the IP address pool for the DHCP
	server.
IP address	It means to specify an IP address as the starting point in the IP
	address pool.
cnt	It means the IP count number.
IP counts	It means to specify the number of IP addresses in the pool. The
	maximum is 10.
status	It means the execution result of this command.
add	It means creating a list of hosts to be assigned.
MAC Addr	It means to specify MAC Address of the host.
del	It means removing the selected MAC address.