Telnet Command Reference Guide V1.1 93
2.21.8 adsl oamlb This command is used to test if the connection between CPE and CO is OK or not.
adsl oamlb [n][type]
Syntax Description
n It means the total number of transmitted packets.
type It means the protocol that you can use.
1 – for F4 Seg-to-Seg (VP level)
2 – for F4 End-to-End (VP level)
4 – for F5 Seg-to-Seg (VC level)
5 – for F5 End-to-End (VC level)
Example
>adsl oamlb 10 2
Tx cnt=10
Rx Cnt=10