Dynacord DMM 4650 owner manual List of available gong parameters, Type four-stroke, three-stroke

Models: DMM 4650

1 52
Download 52 pages 40.35 Kb
Page 16
Image 16

List of available gong parameters

Type four-stroke, three-stroke

bar1:

first gong stroke, A highest sound, B, C, to D deepest sound

attack1:

attack rate from 00ms (hard) to 99ms (soft)

release1:

fading sound from XXL (long, several seconds.), XL, L, M, S, XS, XXS (short, approx. 1sec)

start 2:

start delay of the second gong stroke in seconds. (min 00.0s, max 99.9s)

bar2:

second gong stroke, A highest sound, B, C, to D deepest sound

attack2:

attack rate from 00ms (hard) to 99ms (soft)

release2:

fading sound from XXL (long, several seconds.), XL, L, M, S, XS, XXS (short, approx. 1sec)

start 3:

start delay between second and third gong stroke in seconds. (min 00.0s, max 99.9s)

bar3:

third gong stroke, A highest sound, B, C, to D deepest sound

attack3:

attack rate from 00ms (hard) to 99ms (soft)

release3:

fading sound from XXL (long, several seconds.), XL, L, M, S, XS, XXS (short, approx. 1sec)

start 4:

start delay between third and fourth gong stroke in seconds. (min 00.0s, max 99.9s)

bar4:

fourth gong stroke, A highest sound, B, C, to D deepest sound

attack4:

attack rate from 00ms (hard) to 99ms (soft)

release4:

fading sound from XXL (long, several seconds.), XL, L, M, S, XS, XXS (short, approx. 1sec)

Type two-stroke, one-stroke

bar1:

first gong stroke, A highest sound, B, C, to D deepest sound

attack1:

attack rate from 00ms (hard) to 99ms (soft)

release1:

fading sound from XXL (long, several seconds.), XL, L, M, S, XS, XXS (short, approx. 1sec)

start 2:

start delay of the second gong stroke in seconds. (min 00.0s, max 99.9s)

bar2:

second gong stroke, A highest sound, B, C, to D deepest sound

attack2:

attack rate from 00ms (hard) to 99ms (soft)

release2:

fading sound from XXL (long, several seconds.), XL, L, M, S, XS, XXS (short, approx. 1sec)

repetition: number of repetitions of the gong sequence (min 1x, max 9999x), 0000 corresponds to infinite repetition.

rep-del:

time between two gong sequences in seconds (min 00.1s, max 99.9s).

Remarks regarding parameter setting:

Although the above mentioned parameters are extensively variable, the gained results not always represent a good sound. E. g.: attacks for low frequency bar strokes are acoustically quite different from the gong A sound.

Since a maximum of 2 gong strokes can be simultaneously processed, starting the third gong too early will abruptly end the first one and lead to unpleasant sound cut-off knacks. Effects like these resulting from extreme parameter settings are of physical reason and should be optimized by listening tests, first.

16

Page 16
Image 16
Dynacord DMM 4650 owner manual List of available gong parameters, Type four-stroke, three-stroke