Dynacord DMM 4650 owner manual Sequence Nummer

Sequence Nummer			Title	Priority	Stopp trigger
	S 28		“Message2”	80	off
Step	Command	Parameter	Start Message 2
1:	Out	C1 set	Description: Closing the signaling contact (C1 = message runs)
2:	Sum=	off	switches the audio controls to the priority of the message. After
3:	DMM=	-2dB	the message is finished the DMM 4650 returns to the stand-by
4:	Start	M 02	mode.
5:	wt	Audio

6:End

Sequence Nummer	Title	Priority	Stopp trigger
S 29	“EasyRec1”	80	C3 High >00,1s lat

Step	Command	Parameter	Starts the recording of Message 01 (remote recording),
1:	Out	C3 set	starts by briefly pressing the input C3 button (menu trigger),
2:	Record	M 01	stops by pressing the input C3 button again
3:	Out	C2 set	Description: Closing the signaling contact (C3 = remote recording
4:	Dly=	010,0 s	runs) starts erasing the message. After successful erasing the
5:	if	Stop	signaling contact C2 (=start recording) is being closed. The
6:	Nop		recording is terminated by switching the control input C3 (current
7:	if	Stop	input C3 on). If the termination of the recording mode is not
8:	Jump	14	recognized, the maximum duration is limited to 10 sec. Name and
9:	if	Delay	priority of the message stay unaltered and the DMM 4650 returns
10:	Jump	14	to the stand-by mode.
11:	if	Audio

12:End

13:Jump 07

14:Finish

15:	Out	C2 clr
16:	Jump	11

40