Dynacord DMM 4650 Front Panel, Input Mic, Input Line, Phones, Multi-functionDisplay, Soft Key

FRONT PANEL

1. INPUT MIC

XLR-socket for the connection of a microphone when recording a message. By using a short test-sample, the level is automatically adjusted and the setting is saved.

This input can also be used for making announcements.

2. INPUT LINE

RCA-type sockets for the connection of stereo or monaural audio signal sources (tape deck, CD player) when recording a message. A wired in parallel 0dBu socket on the rear panel is also provided. By using a short test-sample, the level is automatically adjusted and the setting is saved.

This input can also be used for making announcements.

3. PHONES

Stereo phone jack 1/4" (6.3 mm) to pre-listen to messa- ges, gong and alarm signals via headphones. Wired in parallel, a 0dBu socket is provided on the rear panel.

4. Multi-function Display

Back-lit LC display, 2 lines with 16 characters, each.

The display lights up by pressing any key.

The display is dimmed whenever the EXIT-key gets pressed or no key is pressed for at all within a short while.

5. SOFT KEY

Depending on the selected operation mode, the soft keys are used in various ways. The according function is indicated on the display.

6. CURSOR

CURSOR-keys to control the cursor on the display and for modifying data.

7. RECORDER

Keys for …

TITLE skip back, REWIND, PLAY/STOP, REC, FAST FORWARD, TITLE skip forward.

8. EXIT

Key for exiting the edit mode in order to prevent un- authorized operation. Each pressing of the key switches back one menu stage.

9. POWER

The LED lights whenever the DMM 4650 is ready for operation. In case the LED BLINKS you should contact a DYNACORD service center.

6