Sequence Nummer | Title | Priority | Stopp trigger |
S 36 | “ManMorse” | 95 | off |
Step | Command | Parameter |
1: | Out | A1 set |
2: | wt | In A1 High |
3: | Out | B4 clr |
4: | Out | B2 set |
5: | Out | B3 set |
6: | Out | A3 set |
7: | Sum= | off |
8: | DMM= | |
9: | wt | In D4 High |
10: | Start | A 33 |
11: | wt | In D4 Low |
12:Break
13:Jump 09
14:End
Ship alarm “Manual Morse key”
Description: Turns the sound reinforcement system’s power on (relay A1) and waits for acknowledgment (input A1 = system ready). When the system is ready, the output B4 (music program off) is opened and B2, B3 (mandatory reception E, D) is being closed. Closing the signaling contact (A3 = alarm signal running) switches the audio controls to the alarm signal’s priority. A continuous tone (800 Hz = A33) starts when a current is present at the control input D4 and stops after releasing the key. The sequence runs continuously until it is stopped by a sequence with a higher priority (e. g. S 20). The control of settings and relay contacts is taken over by the stop sequence. After the stop sequence ends, the DMM 4650 returns to
Sequence Nummer
S 37
Step | Command | Parameter |
1: | Out | A1 set |
2: | wt | In A1 High |
3: | Out | B4 clr |
4: | Out | B2 set |
5: | Out | B3 set |
6: | Out | A3 set |
7: | Sum= | off |
8: | DMM= | |
9: | Count | 0005 |
10: | Start | A 28 |
11: | wt | Audio |
12: | Dly= | 004,0s |
13: | wt | Delay |
14: | if | Count |
15:End
16:Jump 10
17:End
Title | Priority | Stopp trigger |
“Telefon” | 95 | off |
Telephone bell
Description: Turns the sound reinforcemnet system’s power on (relay A1) and waits for acknowledgment (input A1 = system ready). When the system is ready, the output B4 (music program off) is opened and B2, B3 (mandatory reception E, D) is closed. Closing the signaling contact (A3 = alarm signal running) swit- ches the audio controls to the alarm signal’s priority. The signal sequence is defined as follows: 1 sec. signal (A28), 4 sec. break. It is being repeated five times. Using different signal periods offers the opportunity to realize a code call system. When the call signal ends, the DMM 4650 returns to
44