·Full frequency response and high output for music applications.
·Extended pattern control and higher outputs at lower frequencies using additional DSA230is.
·Exceptional intelligibility for reverberant rooms.
4.2.2 ELECTRONIC
·
·No amplifier or processing racks needed, reducing space and cost.
·Individual amplifier and DSP for each transducer.
·Convection cooled electronics eliminates noisy cooling fans.
·
·Two audio inputs allow summed stereo or priority announcement override capability.
·Electronically balanced inputs maximize the signal to noise ratio.
4.2.3 COMPUTER CONTROL
·
·DSP adjusted and optimized by DSAPilot for plug and play setup.
·User adjustable input EQ, signal delay, level, HPF/LPF, and compression for each cluster.
·Computer can be disconnected for
·Computer can be left connected for monitoring purposes.
4.2.4 NETWORKING
·
·Analog audio and control signals can be
·
·Optional CobraNet interface for digital distribution of audio and computer control via Ethernet.
·Provision for back up audio/computer communications using a redundant Ethernet network, when using CobraNet.
4.2.5 PHYSICAL
·Phoenix Contact and Neutrik EtherCon and PowerCon connectors for reliable connections.
·Low weight (<100 lb / 45 kg) reduces structural mounting requirements.
·Mount vertically while providing asymmetrical
·Brackets supplied for mounting to vertical surfaces.
·Mounting allows
·Optional hardware for suspending enclosures
·Elegant enclosure design and neutral color blends with a variety of architecture.
·Rear enclosure extrusion channels can be used to route cabling.
9
