Figure 3.1 DSA230i & DSA250i
AUDIO –
AUDIO + | SHIELD |
Figure 3.2 Audio Connector
2.3 Returning Products to EAW
If the loudspeaker must be returned to EAW, contact the EAW Service Department for a Return Authorization (See Chapter 7). Use the original shipping carton and packing materials. If the shipping carton is lost or damaged, contact EAW for a new carton, for which there will be a small charge. EAW will not be responsible for damage caused by inadequate packing when returning the loudspeaker for service.
All units returned must have a factory Return Authorization Number. Any units received without a Return Authorization Number assigned and written prominently on the outside of the carton will be refused.
Chapter 3 | Quick Start |
This section provides basic installation requirements. Refer to Chapter 5 for detailed instructions.
Module refers to either a DSA230i or DSA250i loudspeaker.
Cluster refers to any of the permissible arrangements of single or multiple DSA230i or DSA250i modules as defined in DSAPilot. Whether they consist of a single or multiple modules, all DSAi clusters function as a single loudspeaker.
3.1 Description
DSAi modules are variable directivity,
*Also known as
Model DSA250i is a full range module. Model DSA230i can be employed as a
3.2 Audio Signal Connection
NOTE: Using DSAPilot, the two input channels may be summed to mono, used separately, or set up for a priority override function: Audio B overrides Audio A. Equalization, compression, and level are separately adjustable for each input. Overall signal delay for each module and cluster is also provided.
Audio A and B (each):
4
