Here are descriptions of every setup items:
Client PC | Please input any text to describe this IP |
Description (a): | address, up to 16 alphanumerical characters. |
Client PC IP | Please input the starting IP address in the left |
address (b): | field, and input the end IP address in the right field |
| to define a range of IP addresses, or just input the |
| IP address in the left field to define a single IP |
| address. |
Client PC | Please check all services you want to allow or |
Service (c): | deny this IP address to use, you can check multiple |
| services. |
Protocol (d): | If the service you need is not listed above, you can |
| create a new service on your own. Please select |
| TCP or UDP, if you’re not sure, please select |
| ‘Both’. |
Port Range (e): | Please input the port range of new service here. If |
| you want to specify port 80 to 90, please |
| input |
| single port, just input the port number, like ‘80’. |
Add (f): | When you finish with all settings, please click ‘Add’ |
| to save settings, you’ll be brought back to previous |
| menu, and the rule you just set will appear in |
| current IP filtering table. |
If you want to remove all settings in this page, click ‘Reset’ button.
If you want to prevent computers in local network from accessing certain website (like pornography, violence, or anything you want to block), you can use this function to stop computers in local network from accessing
118