Please click ‘Continue’ to back to previous setup menu; to continue on other setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to
2-6-5 Setup procedure for ‘PPTP’:
PPTP requires two kinds of setting: WAN interface setting (setup IP address) and PPTP setting (PPTP user name and password). Here we start from WAN interface setting:
Select the type of how you obtain IP address from your service provider here. You can choose ‘Obtain an IP address Automatically’ (equal to DHCP, please refer to ‘Cable Modem’ section above), or ‘Use The Following IP Address’ (i.e. static IP address)
WAN interface settings must be correctly set, or the Internet connection will fail even those settings of PPTP settings are correct. Please contact
64
