Edimax Technology 3G-6210n manual If you select allow, only MAC addresses listed

other setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting).

3-3-1 Access Control

This function allows or denies computers with specific MAC address from connecting to the network; it can also allow or deny computers with specific IP address, protocol, or port.

Please click ‘Firewall’ menu on the left of web management interface, then click ‘Access Control’, and the following message will be displayed on your web browser:

1

2 3 4

5 6

7

8	9	10
11
12
13	14	15
	16

Here are descriptions of every setup items:

Enable MAC	Check this box to enable MAC address based
Filtering (1):	filtering, and please select ‘Deny’ or ‘Allow’ to
	decide the behavior of MAC filtering table. If you
	select deny, all MAC addresses listed in filtering
	table will be denied from connecting to the network;
	if you select allow, only MAC addresses listed in
	filtering table will be able to connect to the network,
	and rejecting all other network devices.

114