NOTE: Some service providers use ‘DHCP’ (Dynamic Host Configuration Protocol) to assign IP address to you. In this case, you can choose ‘Cable Modem’ as Internet connection type, even you’re using another connection type, like xDSL. Also, some cable modem uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem connection, even you’re using a cable modem.
3. Basic Setting
1
2
3
4
5
6
Here are descriptions of every setup items:
Wireless Module (1): Please click “Enable” to start using the wireless function of this router, or select “Disable” to close the wireless interface of this router.
Band (2): Please select a Bane type from the dropdown list of ‘Band’, It allows you to set the AP fix at 802.11b or 802.11g or 802.11n mode. You also can select B+G or B+G+N mode to allow the AP select 802.11b, 802.11g and 802.11n connection automatically.
SSID (3): This is the name of wireless router. You can type any alphanumerical characters here, maximum 32
29
