Edimax AC-M3000/AC-M1000
User’s Manual
y802.1X Authentication: When enabling this function, the hyperlink of Radius Client List will appear. Click the hyperlink to get into the Radius Client Configuration page for further configuration. In the Radius Client Configuration page, the clients, which are using 802.1X as the authentication method, shall be put into this table. Edimax
yTrans Full Name: When enabled, both the ID and postfix will be transferred to the RADIUS server for authentication. When disabled, only the ID will be transferred to RADIUS server for authentication.
yNASID: Enter the NASID of the Edimax
yServer IP: Enter the IP address/domain name of the RADIUS server.
yAuthentication Port: Enter the authentication port of the RADIUS server and the default value is 1812.
yAccounting Port: Enter the accounting port of the RADIUS server and the default value is 1813.
ySecret Key: Enter the key for encryption and decryption.
yAccounting Service: Choose to enable or disable the accounting service for accounting capabilities.
yAuthentication Protocol: There are two methods, CHAP and PAP, for selection.
yEdit Policy Mapping: Click the hyperlink of Edit Policy Mapping to enter the Policy Mapping page. Choose to enable or disable policy mapping by RADIUS class attributes.
51
