Edimax AC-M3000/AC-M1000
User’s Manual
4.3.2 AP Discovery
Use this function to detect and manage all the supported APs in the network segments.
yTo discover AP manually, please fill in the required data.
¾Interface: Check Uncontrolled or/and Controlled and enter the Base IP and Pool Size (the discovered APs will be given an IP address among the pool).
¾AP Access: Input the IP Address Range of the AP to be discovered, (the default is
192.168.2.1/192.168.2.1), ID (the default is admin) and Password (the default is 1234) of the AP. Then click the Discover button and the APs that match the given settings will show in the Discovered AP List below. If any IP address among the IP range assigned for a specific AP is used, there will be a warning message showing up. Please change the Base IP or Pool Size of the desired Interface to provide available IP addresses
91
