Instruction Manual

HAS60E-IM-HW

June 2007

NGA 2000 CLD

WARNING

OVERBALANCE HAZARD

This analyzer module may tip instrument over if it is pulled out too far and the Platform is not properly supported.

CAUTION

Tampering with or unauthorized substitution of components may adversely affect the safety of this instrument. Use only factory documented/approved components for repair.

Because of the danger of introducing additional hazards, do not perform any unauthorized modification to this instrument!

WARNING

POSSIBLE EXPLOSION HAZARD

This equipment is not designed and should not be used in the analysis of flammable samples. Use of this equipment in this way could result in explosion or death.

WARNING

POSSIBLE EXPLOSION HAZARD

Ensure that all gas connections are made as labeled and described within this manual and leak free. Improper gas connections may cause explosion, serious injury or death.

CAUTION

HIGH TEMPERATURES !

While working at thermostated components inside the analyzer modules hot components may be accessible!

CAUTION

Do not interchange gas inlets and outlet! All gases must be conditioned before supplying! When supplying corrosive gases ensure that gas path components are not affected!

Exhaust lines must be installed in a descending way, need to be pressureless, frost-protected and in compliance with applicable legislative requirements!

Emerson Process Management GmbH & Co.OHG

Preface P - 5