Installing the Device
Rack Mounting the 2H258-17R
Proceed as follows to install the
1.There are several mounting holes in the rackmount brackets and the bottom of the chassis so that each mounting bracket may be adjusted forward or backward to mount the device further into, or out of the rack, depending on the installation requirements. Position the rackmount brackets over the appropriate holes.
2.Locate the four
Figure 3-3 Attaching the Rackmount Brackets
Rackmount Bracket Screws |
Rackmount Bracket
CONSOLE |
| TELCO | CPU |
|
|
| PWR |
16 |
| 15 |
| 14 |
| 13 |
| 12 |
| 11 |
| 10 |
| 9 |
| 8 |
| 7 |
| 6 |
| 5 |
| 4 |
| 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COM | |
RESET |
21
TX RX | TX RX | TX RX | TX RX | TX RX | TX RX | TX RX | TX RX TX RX | TX RX | TX RX | TX RX | TX RX | TX RX TX RX | TX RX |
|
|
|
|
|
|
|
|
|
|
|
| SWITCH WORKGROUP ETHERNET FAST | |
3.With the mounting brackets attached, position the
