Epson 3000 Power, Pause, Out, Ink, End, Type, Paper, Media, Solution, Printer Status, Table 5-3.LED Error Status and Solutions

						EPSON Stylus COLOR 3000
	Table 5-3. LED Error Status and Solutions
Printer Status	Power	Pause	Paper	Ink	Media	Solution
			Out	End	Type
Power on	On	⎯	⎯	⎯	⎯	⎯
Data proceeding	Blinks	⎯	⎯	⎯	⎯	⎯
Paper Out	⎯	⎯	On	⎯	⎯	After loading paper, press the
						Pause button and then press
						the Load/Eject button.
Paper Jam	⎯	⎯	Blinks	⎯	⎯	After removing paper, press the
						Pause button and then press
						the Load/Eject button.
Print ready	⎯	On	⎯	⎯	⎯	⎯
During ink sequence	⎯	Blinks	⎯	⎯	⎯	⎯
No cartridge or ink	⎯	⎯	⎯	On *1	⎯	Replace the ink cartridge.
end
Ink low	⎯	⎯	⎯	B￿￿￿￿￿*1	⎯	Have a new cartridge ready.
Fatal error	Blinks	⎯	⎯	⎯	⎯	Turn off and back on the printer.
						Set the lever back to the
Release lever error	⎯	⎯	⎯	⎯	Blinks	previous position and eject the
						loaded paper. Then set the lever
						to the appropriate position for
						the selected type of paper.
Maintenance						Replace the waste ink drain
	Blinks	Blinks	Blinks	On*2	Blinks	pads and perform	￿￿￿￿￿￿
requested
						reset. (See Section 1.4.3 and
						Section 3.2.9.)
Reset￿		All go on for 1 second.				⎯
Timer ￿￿ reset,
￿￿￿￿￿￿ Clear

∗1: Corresponding Ink End LED indicator goes on.

∗2: All Ink End LED indicators go on.

Rev. A 5-3