The optional cut-sheet feeder does not feed your single-sheet paper properly.

Cause

What to do

 

 

The cut-sheet feeder is not

Reinstall it as described in “Installing

installed properly.

the cut-sheet feeder” on page A-3.

 

 

Too many sheets are loaded

Load no more than 150 single sheets in

in the cut-sheet feeder.

the high-capacity cut-sheet feeder. See

 

“Cut-Sheet Feeders” on page A-2for

 

more information.

You may have loaded the wrong type of paper in bin 2 of the double-bin cut-sheet feeder.

Use only the high-capacity feeder (bin 1) or the sheet guide for single- sheet multipart forms (only the type glued at the top of the forms), envelopes, and postcards.

The edge guides of the

Align the left edge guide with the

cut-sheet feeder are not

arrow mark, then move the right edge

positioned correctly.

guide to match your paper’s width.

 

 

There are only a few sheets of

Load more paper in the cut-sheet

paper left in the bin.

feeder.

 

 

Sheets of paper are stuck

Remove the paper stack, fan it, and

together.

then reload it.

Troubleshooting 5-7