3.If the power cord is not attached to the printer, plug the appropriate end into the AC inlet on the back of the printer.

4.Plug the power cord into a properly grounded electrical outlet.

Connecting the Printer to Your Computer

Your printer has a standard IEEE-1284 compatible parallel interface connection and an optional interface.

If your computer requires a different type of printer interface, try one of the Type B optional interfaces described in “Optional interface cards” on page A-21.

Follow the steps below to connect the printer to your computer using a parallel interface connector, or a ground wire connector.

1.Make sure both the printer and computer are turned off.

2.Plug the cable connector securely into the parallel interface connector.

.

1-6Setting Up the Printer