Installing the printer software in Windows Me, 98, 95, 2000, or NT 4.0

Follow the steps below to install the printer software in Windows Me, 98, 95, 2000, or NT 4.0:

Note:

❏Installing the printer software for Windows 2000 or NT 4.0 may require administrator privileges. If you have problems, ask your administrator for more information.

❏If you wish to make a diskette version of the printer software on your CD-ROM, insert the CD and run the EPSETUP program. In the dialog box that appears, click the Driver disk creation utility button and follow the on-screen instructions.

❏If you are using the diskette version of the EPSON software, make a backup copy of the EPSON printer software disk or disks before you begin installation.

❏If the New Hardware Found screen or any other wizard appears when you turn on your computer, click Cancel and follow the steps below.

❏If the Digital Signature Not Found screen appears, click Yes. If you click No, you must reinstall the printer driver as described below.

❏Installation time varies depending on your computer.1.Make sure that the printer and computer are switched off.2.Switch the PC on. Windows starts automatically. Then switch the printer on.

3.Insert the CD-ROM containing the printer software into the CD-ROM drive. TheAutoPlay function of the CD-ROM drive automatically starts the installation program on the CD-ROM.

Setting Up the Printer 1-13