If the installation program does not start automatically, click on Start and then on Run. In the Run dialog box, enter the drive letter of your CD-ROM drive in the command line (e.g. E:\), followed by the command START.EXE (e.g. E:\START.EXE) and click on the OK button.

Note:

If your CD-ROM drive has a drive letter other than "E", substitute the appropriate letter. The installation program starts. The subsequent procedure is menu-driven, i.e., you can select the relevant options from a list simply by clicking with the mouse. The remainder of the installation is automatic and you do not need to enter any more information.

4.Select the desired options and follow the on-screeen instructions.

5.After the printer software has been successfully installed, click on the button identified by a door icon to exit the installation program.

When you install the printer driver on Windows 98, 95, 2000 or NT 4.0, EPSON Status Monitor 3 will also be installed.

For information on opening and using the software, see Chapter 3, “Using the Printer Software.”

Installing the printer software in Windows 3.1 or NT 3.5x

Follow the steps below to install the printer software in Windows 3.1 or NT 3.5x systems.

Note:

Installing the printer software on Windows NT 3.5x may require administrator privileges. If you have problems, ask your administrator for more information.

1-14Setting Up the Printer