Epson 680, 680Pro Card, Bin-1, Envelope, Load/Eject, Sheet Feeder, Tear Off/Bin, Paper Source

7.Push back the paper set levers to clamp the paper against the guide rollers.

8.Before printing, make sure single sheet feeding is selected. Also adjust the thickness setting to the paper loaded in the cut-sheet feeder. See “Adjusting the Paper Thickness Lever” on page 2-6for details.

9.In your printer driver software, select your paper size from the Paper Size list, and select Sheet Feeder Bin-1from the Paper Source list. (If you are printing from a DOS application, select the bin number using the Tear Off/Bin button (LQ-680) or the Paper Source button (LQ-680Pro) on the control panel. If you use envelopes or postcards, select Card or Envelope on the control panel as described in “Using Envelopes” and “Using Postcards” in Chapter 2.)

The cut-sheet feeder loads paper when you send data to the printer. You can also load paper by pressing the Load/Eject button.

A-10Enhancing Your Printer With Options