After printing a sheet, the printer ejects the printed sheet onto the paper guide. If you are printing a multiple-page document, remove the printed sheet and insert a new sheet into the paper guide. The printer automatically advances the paper and resumes printing.
Note:
If the printer does not eject the printed sheet, press the Load/Eject button.
cCaution:
Use the knob on the right side of the printer only to clear paper jams when the printer is off. Otherwise, you may damage the printer.
Using Single-Sheet Multipart Forms
Your printer can use single-sheet multipart forms with up to six parts including the original. You can use carbonless multipart forms, or carbon-backed multipart forms using the paper guide.
cCaution:
Do not use carbon-interleaved multipart forms.
Before printing, set the paper thickness lever to the correct position for your multipart forms as described in the table on page 2-7,or to the Auto position (LQ-680Pro only).
You can load single-sheet multipart forms in the same way as you load ordinary single sheet. For instructions, see “Using Single Sheets” earlier in this chapter or Appendix A, “Loading paper from the cut-sheet feeder.”