Follow these steps to load single sheets from the paper guide:
1.Make sure that the printer is off and the paper guide is attached as described in Chapter 1. Then close the sprocket covers and push down the sprocket lock levers to lock the sprocket units in place.
2.For LQ-680 users:
Select single-sheet feeding with the paper release lever as described in “Selecting a Paper Source” on page 2-2.Also make sure the paper thickness lever is set to 0 if you are using ordinary single-sheet paper.
For LQ-680Pro users:
Select single-sheet feeding with the Paper Source button as described in “Selecting a Paper Source” on page 2-2. Also make sure the paper thickness lever is set to Auto or 0 if you are using ordinary single-sheet paper.
3.Turn on the printer.
