Installing the cut-sheet feederThe cut-sheet feeder comes with a paper guide for stacking printed sheets. To install the cut-sheet feeder, you need to attach both the cut-sheet feeder and the paper guide. Follow the steps below.
Note:
❏The second-bin feeder can be used only in combination with the high- capacity feeder.
❏Install both the high capacity cut-sheet feeder and the double-bin cut-sheet feeder the same way, as described below. Before you install the double-bin cut-sheet feeder, assemble it as described in the cut- sheet feeder manual.
1.Make sure the printer is turned off.
2.Close the sprocket covers if they are open, and lock the sprocket units by pushing down the lock levers if necessary.
Note:
You do not need to remove your continuous paper from the tractor to use the cut-sheet feeder. For information on switching between the cut-sheet feeder and continuous paper, see Chapter 2, “Switching Between Continuous Paper and Single Sheets.”
Enhancing Your Printer With Options A-3
