About Your Printer’s Default Settings

The default settings control many printer functions. While you can often set these functions through your software or printer driver, you may sometimes need to change a default setting from the printer’s control panel using the default-setting mode.

The following table lists the default settings and the options you can select in the default-setting mode. The settings are explained in detail after the table. For instructions on changing the default settings, see “Changing default settings” on page 4-9.

Settings

Options

 

 

Page length for tractor*

Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,

 

11, 70/6, 12, 14, 17

 

 

Skip over perforation

On, Off

 

 

Auto tear off

On, Off

 

 

Auto line feed

On, Off

 

 

Print direction

Bi-D, Uni-D, Auto

 

 

Software

ESC/P2, IBM 2390 Plus

 

 

0 slash

0, 0

 

 

High speed draft

On, Off

 

 

I/F mode

Auto, Parallel, Option

 

 

Auto I/F wait time

10 seconds, 30 seconds

 

 

Parallel I/F bidirectional

On, Off

mode

 

 

 

Packet mode

Auto, Off

 

 

Auto CR (IBM 2390 Plus)**

On, Off

 

 

A.G.M. (IBM 2390 Plus)**

On, Off

 

 

*The options available vary depending on the country of purchase.

**These settings take effect only when IBM 2390 Plus emulation is selected.

***This option is available with the LQ-680Pro only.

Changing Printer Settings From the Printer’s Control Panel 4-3