Introduction

Windows System Requirements

To use your printer and its software with a PC, your system should have:

◗An IBM® compatible PC with at least a 386/25 MHz or faster processor

◗Microsoft® Windows 3.1, Windows for Workgroups™ 3.1, or Windows 95

◗At least 8MB of RAM (more for Windows 95)

◗At least 20MB of free hard disk space for storing images (40MB or more is recommended)

◗VGA, Super VGA, or better display adapter and monitor

◗A shielded, twisted-pair parallel cable (6 to 10 feet long) to connect your computer to the printer; the cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics® compatible connector for the printer.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your system should have:

◗Any Macintosh or Power Macintosh model except the Macintosh +, Macintosh 512, Macintosh Classic, Macintosh SE, or PowerBook™ 100

◗System 7.1 or later

◗At least 8MB of RAM (16MB or more is recommended)

◗At least 20MB of free hard disk space for storing images (40MB or more is recommended)

◗VGA (8 bit, 640 × 480) or better display and monitor

◗Standard Apple® System Peripheral-8 cable or equivalent (RS-422, 8-pin mini DIN male/male, Belkin F2V024 recommended)

2