Technical Specifications

Control Panel Settings

Changing control panel settings

You can change the following “default” settings from the printer’s control panel:

Setting

Options

 

 

Print direction

Auto, Bi-D, Uni-D

 

 

Font

Courier, Roman, Sans Serif, Prestige,

 

Script, Roman T, Sans Serif H, Draft

 

 

Pitch

10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,

 

Proportional

 

 

I/F mode

Auto, Parallel, Serial, Option

 

 

Auto I/F wait time

10 seconds, 30 seconds

 

 

Software

ESC/P 2, IBM X24E

 

 

Auto CR (IBM mode only)

Off, On

 

 

AGM (IBM mode only)

Off, On

 

 

Character table

PC437, PC850, PC860, PC861, PC863,

 

PC865, Abicomp, BRASCII, Roman 8, ISO

 

Latin 1, Italic U.S.A., Italic France, Italic

 

Germany, Italic U.K., Italic Denmark 1,

 

Italic Sweden, Italic Italy, Italic Spain 1

 

 

Auto line feed

Off, On

 

 

Network I/F mode

Off, On

 

 

Loading position

8.5 mm, 3 mm, Others

 

 

Economy

Off, On

 

 

Parallel I/F transfer rate

Fast, Normal

 

 

Follow these steps to change the settings listed above:

1.Make sure the printer is turned off and has paper loaded.

2.Hold down the X color cleaning button and press the power button. The printer prints a summary of instructions for changing settings and choosing the language to use for additional instructions.

3.Press the X color cleaning button to print a list of current settings and additional instructions.

4.After you make the changes you want, turn the printer off to save the settings. The settings remain in effect until you change them again.

B-7