Managing Print Jobs and Network Printing

5.Click the Add Port button, then specify the network path to the printer and click OK.

6.Open the Spool Manager window as described on page 4-2.

7.In the Spool Manager window, double-click your printer’s queue. The Queue Setup dialog box appears.

8.Make sure the Use Print Manager for this port option is checked. Then click OK.

Network Printing on a Macintosh

If you want to use your printer on an AppleTalk™ network, you need to install one of the optional interface boards: either the LocalTalk™ board or the Ethernet™ board. See Appendix A for more information about optional interfaces.

Then you can use the EPSON Namer utility and set up your printer in the Chooser. The EPSON Namer was installed on your hard drive along with the other printer software.

Assigning a Name to the Printer

Follow these steps to use the EPSON Namer utility:

1.Double-click the EPSON Namer icon on your hard drive.

2.Click the EPSON Stylus(AT) icon in the Device Types window.

3.Select the zone where your printer is located.

4.Under New Name, type a name from your printer to distinguish it from other printers on the network.

5.Click Rename and then click Done.

4-12