Troubleshooting
All the lights are flashing.
Possible cause | Solution |
|
|
You haven’t removed all the | Remove the packing material, following the instructions on the |
packing material from the | notice sheet in the box. If the printer still doesn’t print, contact |
printer. | EPSON as described in the Introduction. |
|
|
An internal error has | Turn off your printer, wait a few seconds, and turn it on again. If |
occurred. | the lights still flash or stay on, contact EPSON as described in the |
| Introduction. |
|
|
The printer has finished charging the ink cartridge, but the P power light is still flashing.
Possible cause | Solution |
|
|
The ink cartridge clamp | Press down on the clamp to lock it. |
isn’t locked down. |
|
|
|
Packing material remains in | Remove all packing material, following the instructions on the |
the carriage. | notice sheet. |
|
|
The printer needs to | If the printer is not moving or making noise, but the light is still |
initialize. | flashing for more than 5 minutes, turn the printer off. If the light is |
| still flashing when you turn it back on, contact EPSON as described |
| in the Introduction. |
|
|
The printer software installed with Windows 3.1 doesn’t work correctly after you upgrade to Windows 95.
Possible cause | Solution |
|
|
Your printer software is not | Reinstall the printer software after installing Windows 95. |
set up correctly for |
|
Windows 95. |
|
|
|
After you install your printing software, you see the Windows 95 New Hardware found window.
Possible cause | Solution |
|
|
An operating system error | Click Do not install a driver, and then click OK. |
has occurred. |
|
|
|