Note:

If you’re using a stand-alone Macintosh or

astand-alone PC running Windows 95, follow the quick instructions on your CD-ROM folder to install your printer software. If you need more detailed instructions, see the steps in this appendix.

B Installing

Printer Software

and Configuring

on a Network

Follow the instructions in this appendix to install the printer software on your computer.

If your system is on a Windows NT 4.0, Windows 95, or Macintosh network, follow the steps in this appendix to configure your printer software for network printing.

Installing Your Printer Software

Follow the steps in these sections to install your printer software:

For Windows 3.1 instructions, see the next section.

For Windows 95 instructions, see page B-2

For Windows NT 4.0 instructions, see page B-4

For Macintosh instructions, see page B-5

Installing Printer Software for Windows 3.1

1.Make sure the printer is connected to your computer as described on the Start Here card.

2.Turn on the printer and wait until the Ppower light stops flashing. Then turn on your computer.

B-1