Installing Printer Software and Configuring on a Network

If you see a screen called New Hardware Found or Update Device Driver Wizard, or another one that asks if you want Windows 95 to install a driver for you, click Cancel.

These screens could appear at any point as you follow these steps. Do not select any option on any of these screens except Cancel. You cannot install your printer software using these screens.

5.Insert the EPSON printer software CD-ROM or diskette 1.

6.If you’re installing from the CD-ROM, click Start, select Run, and type D:\EPSON (where D: is the drive letter of your CD-ROM); then click OK. After the installation program starts, read the license agreement and click Agree.

If you’re installing from diskettes, click Start, select Run, and type D:\SETUP (where D: is the drive letter of your diskette drive); then click OK.

7.Make sure EPSON Stylus COLOR 850 is selected and click OK.

8.If you’re using the CD-ROM, follow the instructions on the screen to install your printer software, the Status Monitor 2 utility, and your creative software.

If you’re using diskettes, follow the instructions on the screen to install your printer software. Then repeat step 5 using the Status Monitor 2 diskettes and follow the instructions on the screen to install Status Monitor 2.

Your printer software icons appear in an EPSON folder and your printer is automatically set as the Windows 95 default printer.

9.See Chapter 1 for instructions on using your printer software.

B-3