Specifications
Color and black | • EPSON Stylus PRO |
printing | • EPSON Stylus COLOR 500 |
| • EPSON Stylus COLOR II |
| • |
| • |
Control Panel Settings
Changing control panel settings
You can change the following default settings from the printer’s control panel:
Setting | Options |
|
|
Print direction | Auto, |
|
|
Font | Courier, Roman, Sans Serif, Prestige, Script, |
| Roman T, Sans Serif H, Draft |
|
|
Pitch | 10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi, |
| Proportional |
|
|
I/F mode | Auto, Parallel, Serial, Option |
|
|
Auto I/F wait time | 10 seconds, 30 seconds |
|
|
Software | ESC/P 2, IBM X24E |
|
|
Auto CR (IBM mode only) | Off, On |
|
|
AGM (IBM mode only) | Off, On |
|
|
Character table | PC437, PC850, PC860, PC861, PC863, PC865, |
| Abicomp, BRASCII, Roman 8, ISO Latin 1 |
|
|
International character set | Italic U.S.A., Italic France, Italic Germany, Italic |
for italic table | U.K., Italic Denmark 1, Italic Sweden, Italic Italy, |
| Italic Spain 1 |
|
|
Auto line feed | Off, On |
|
|
Network I/F mode | Off, On |
|
|
Loading position | 8.5 mm, 3 mm, Others |
|
|
Economy | Off, On |
|
|
Parallel I/F transfer rate | Fast, Normal |
|
|
Follow these steps to change the settings listed above:
1.Make sure the printer is turned off and has paper loaded.
2.Hold down the X color cleaning button and press the Ppower button. The printer prints a summary of instructions for changing settings and choosing a language for the instructions.
3.Press the X color cleaning button to print a list of current settings (indicated with arrows) and additional instructions.
4.After you make the changes you want, turn the printer off to save the settings. The settings remain in effect until you change them again.