Installing Printer Software and Configuring on a Network
Configuring for Macintosh Network Printing
If you want to use your printer on an AppleTalk network, you need to install one of the optional interface boards: either the LocalTalk board or the Ethernet board. See Appendix A for more information about optional interfaces.
Then you can use the EPSON Namer utility and set up your printer in the Chooser. The EPSON Namer was installed on your hard drive along with the other printer software.
Assigning a Name to the Printer
Follow these steps to use the EPSON Namer utility:
1.
2.Click the SC 850(AT) icon in the Device Types window.
3.Select the AppleTalk zone where your printer is located.
4.Under New Name, type a name from your printer to distinguish it from other printers on the network.
5.Click Rename and then click Done.
Setting Up the Printer for AppleTalk
Make sure your printer is turned on and then follow these steps to set up your printer on an AppleTalk network:
1.Open the Chooser from the Apple menu.
2.Click the SC 850(AT) icon.
3.Select the AppleTalk zone you want to use. A list of all printers connected to the selected zone appears on the right.