User’s Guide
Maintaining Your Product and Software
C Secure the ink cartridge holder to the case with tape as shown, then close the scanner unit.
Note:
Do not place tape on the white flat cable inside the product.
D E F
Unplug the power cord from the outlet, then disconnect the USB cable from the product.
Close the paper support and the output tray.
If you have raised the control panel, pull the release lever on the rear of the control panel until it clicks, and then lower the control panel to store.
G Repack the product in the box, using the protective materials that came with it.
Note:
❏Keep the product level during transport.
❏Be sure to remove the protective materials from the product before using it again.
108