Epson EMP-7950 Before Using the Remote Control, Inserting the Batteries, Insert the batteries, Remove the battery cover, Replace the battery cover

Before Using the Remote Control

User’s Guide

12

Inserting the Batteries 2 Insert the batteries.

Check the positions of the (+) and (–) marks inside the battery

The batteries are not already inserted into the remote control at the time theholder to ensure that the batteries are inserted the correct way. projector is purchased. You will need to insert the batteries that are

provided with the projector before the remote control can be used.

CAUTION

Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the batteries.

PROCEDURE
1	Remove the battery cover.	3	Replace the battery cover.
	While pushing down on the rib of the battery cover, slide the

battery cover in the direction of the arrow.	Slide the battery cover in until the tab clicks into place.
Rib

TIP

If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. If this happens, replace the batteries with two new AA alkali batteries.