User’s Guide

Adjusting the Screen Image

 

46

 

 

 

TIP

•The "Auto Keystone", "H/V-Keystone" and "Quick Corner" functions cannot both be used together to correct keystone distortion. If you use one function to correct keystone distortion, any correction that has been applied using the other function will be cancelled.

•The larger the angle of tilt, the poorer the focus of the contours in the projected images will become.

Automatic keystone correction

When the projector has been tilted vertically, automatic keystone correction is carried out so that images with no distortion are projected.

•If a large amount of keystone correction is applied, fine details such as text characters and lines may go out of focus.

•Keystone corrections that have been applied using the keystone correction functions are memorised even when the projector's power is turned off. If you have changed the projection position or angle, you will need to repeat the correction procedure.

•"H-Keystone" and "Height" cannot be used at the same time.

•When keystone correction is carried out, the projected images will become smaller. Use the zoom function to adjust the size of the images if necessary. p.42

•If the text part of the image is blurred after keystone correction is carried out, decrease the sharpness setting. p.78, p.81

Automatic keystone correction is carried out approximately one second after the projector is set up and projection starts. A vertical keystone correction gauge appears on the screen while automatic adjustment is in progress.

TIP

•Automatic keystone correction is not carried out if "Rear Proj." or "Ceiling" in the "Advanced1" menu is set to "ON", or if the projection area has been corrected manually using the "Quick Corner" function.

•If you would like to make further fine adjustments after automatic keystone correction has been carried out, or if the projector is tilted horizontally, you can carry out keystone correction manually.

p.47

•If you do not want automatic keystone correction to be carried out, change the "Auto Keystone" setting in the "H/V-Keystone" sub- menu of the "Keystone" command in the "Setting" menu to "OFF". p.85