User’s Guide

 

Using the Configuration Menu Functions

 

 

 

 

 

 

87

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sub-menu

 

Function

Default

 

 

 

 

Sleep

Sets the energy saving operation when no video signal is

OFF

 

 

 

 

Mode

being input.

 

 

 

 

 

 

 

 

 

 

 

•When set to "ON", projection stops automatically and after

 

 

 

 

 

 

 

 

the cool-downgperiod is finished, the projector changes to

 

 

 

 

 

 

 

 

sleep mode (standby mode) if no operations are carried out

 

 

 

 

 

 

 

 

for approximately 30 minutes while the "No Signal."

 

 

 

 

 

 

 

 

message is being displayed. (The

 

indicator lights

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

orange.)

 

 

 

 

 

 

 

 

 

 

 

•Projection starts again when the [Power] button on either

 

 

 

 

 

 

 

 

the remote control or the projector's control panel is

 

 

 

 

 

 

 

 

pressed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

Resets all adjustments values for the "Setting" menu

-

 

 

 

 

 

 

 

functions except for the "Computer Input" and "BNC Input"

 

 

 

 

 

 

 

 

settings to their default settings.

 

 

 

 

 

 

 

 

This cannot be reset to the initial setting if the "User's Logo

 

 

 

 

 

 

 

 

Protect" function of Password Protect has been set to "ON"

 

 

 

 

 

 

 

 

and "No-Signal Msg." or "A/V Mute" is set to "Logo".

 

 

 

 

 

 

 

 

p.61

 

 

 

 

 

 

 

 

 

 

 

•Press the [Enter] button on the remote control or the

 

 

 

 

 

 

 

 

[Auto/Enter] button on the projector's control panel to

 

 

 

 

 

 

 

 

reset.

 

 

 

 

 

 

 

 

 

 

 

•Select "Reset All" to reset all menu settings – including

 

 

 

 

 

 

 

 

settings for the "Video" and "Audio" menus – to their

 

 

 

 

 

 

 

 

default settings.

p.95