Optional Accessories and Consumables

User’s Guide

151

The following optional accessories are available for purchase if required. This list of optional accessories is current as of December 2004. Details of accessories are subject to change without notice.

Optional Accessories

Soft carry case ELPKS28

Hard travel case ELPKS29

Use this case if you need to carry the projector by hand.

60" screen ELPSC07 80" screen ELPSC08 100" screen ELPSC10

A portable roll-type screens. (Aspect ratio 4:3)

50" portable screen ELPSC06

A compact screen which can be carried easily. (Aspect ratio 4:3)

VGA-HD15 PC cable ELPKC02

(1.8 m - for mini D-Sub 15-pin/mini D-Sub 15-pin)

This is the same computer cable as the projector's accessory computer cable.

VGA-HD15 PC cable ELPKC09

(3 m - for mini D-Sub 15-pin/mini D-Sub 15-pin) VGA-HD15 PC cable ELPKC10

(20 m - for mini D-Sub 15-pin/mini D-Sub 15-pin)

Use these extension cables if the accessory computer cable is too short.

Digital video cable DVI-D/DVI-D ELPKC20 (3 m - for DVI-D male/male)

This is a DVIg cable for connecting the projector to a computer with a digital RGB output interface.

Component video cable ELPKC19

(3 m - for mini D-Sub 15-pin/RCA male × 3) Use to connect a component videog source.

Remote control cable set ELPKC28

(10 m - for 3.5 mm dia. mini plug (male-male)) (10 m - for 3.5 mm dia. mini jack (male-female))

Use in order to operate the projector accurately by remote control from a distance.

Long throw zoom lens* ELPLL05

(Projection distance ratio: Approx. 2.33–3.15) Medium throw zoom lens* ELPLM03 (Projection distance ratio: Approx. 1.75–2.36)

Wide Zoom Lens* ELPLW03 (For EMP-7950NL/7900NL) (Projection distance ratio: Approx. 1.3–1.8)

Projection distance ratio = Projection distance/Width of projection area The values should be used as a guide for setting up. The value will vary depending on setup conditions and the zoom setting.

Ceiling plate*ELPFC03

Pipe 370 (370 mm/silver)* ELPFP04

Pipe 570 (570 mm/silver)* ELPFP05

Pipe 770 (770 mm/silver)* ELPFP06

Use when installing the projector on a high ceiling or a ceiling with veneer panels.

Ceiling mount* ELPMB13

Use when installing the projector on a ceiling.

Image presentation camera ELPDC04

Use to project books, OHP films and slides.

*A special method of installation is required in order to suspend the projector from the ceiling. Please contact your supplier if you would like to use this installation method.

Consumables

Spare lamp ELPLP22

(Set with spare lamp and two spare air filters)

Use as a replacement for spent lamps.

Filter kit (3 sets of 2 air filters (total 6)) ELPAF01

Use as a replacement for spent air filters.