Epson EMP-7950 Drawing Straight and Curved Lines, Set the ending point for the line, Set the starting point for the line, Press the [Effect] button on the remote control

User’s Guide

Functions for Enhancing Projection 68

TIP

The last pointer icon type used will remain as the current pointer icon until the projector's power is turned off, so that when the Effect function is used, that pointer icon will appear. When the projector's power is turned off, the pointer icon that has been saved using the "Pointer/Line1" command will be the first pointer icon to be displayed the next time the Effect function is used.

Drawing Straight and Curved Lines

You can draw straight lines to emphasise aspects of an image, and draw freehand lines to circle parts of the image at times such as when giving presentations.

PROCEDURE

1	Press the [Effect] button on the remote control.
	The pointer icon will appear in the middle of the projection area.
	The pointer icon will change to the icon set for "Pointer/Line1",
	"Pointer/Line2" and "Pointer/Line3" in that order each time the
	[Effect] button is pressed, and you can then select the type of
	line that has also been set for that pointer type.
	Remote control

2	Set the starting point for the line.
	Straight line: Move the pointer icon to the starting point for the
		line and press the [Enter] button.
	Curved line : Move the pointer icon to the starting point for the
		line and hold the [Enter] button down for
		approximately 1.5 seconds to start drag mode.
		The [Enter] button will light.

3	Set the ending point for the line.
	Straight line: Move the pointer icon to the ending point for the
			line and press the [Enter] button.
	Curved line : Move the pointer icon to the ending point for the
			line. The path moved by the pointer icon will
			appear as a line drawn on the screen.
			Press the [Enter] or [ESC] button. The light for
			the [Enter] button will turn off.
		Straight line		Curved line