User’s Guide

Connecting to a Video Source

26

 

CAUTION

Projecting Composite Videog Images

 

When connecting the projector to other video sources, take the following precautions.

•Turn the power off for both the projector and the video source before connecting them. If the power for either device is on at the time of connection, damage may result.

•Check the shapes of the cable connectors and the device ports before making the connections. If you try to force a connector to fit a device port with a different shape or number of terminals, damage to the connector or port may result.

•Do not bind the power cable and the connecting cable together. If the power cable and the connecting cable are bound together, image interference or errors in operation may result.

Use a commercially- available A/V cable to make the connection.

To video output port (yellow)

 

A/V cable

To [Video] port (yellow)

 

 

 

 

(commercially-available)

 

 

To audio output

To [Audio] port

p.29

ports

p.29

 

 

TIP

When connecting more than one device to the projector, use the [Video] button on the remote control, or the [Video/BNC] button on the projector's control panel to switch between devices after starting projection. p.37