User’s Guide

Problem Solving

 

130

 

 

 

You cannot connect from another computer when images are being projected during a network connection (EMP-7950 only)

Check

Remedy

 

 

Has the person making the presentation left

If you try to connect to a projector from a computer while Network Screen is running and the

the meeting room without closing the

projector is already connected to another computer, the connection to the first computer will be

connection?

terminated and the projector will then connect to the next computer.

 

If no projector keyword has been set in the projector or the keyword is known, it is possible to

 

terminate the current connection and connect to the projector by establishing a new connection from

 

the computer.

 

If a projector keyword has been set in the projector and the projector keyword is unknown, terminate

 

the connection from the projector and then reconnect. To terminate the connection from the

 

projector, press the [ESC] button on the remote control, select the "Exit" button from the displayed

 

menu and then press the [Enter] button on the remote control. Connect from the desired computer

 

after terminating the connection.

 

"Disconnecting from a Network Connection" in the EasyMP Network Setup Guide

 

 

EMP NS Connection starts, but a projector is not found (EMP-7950 only)

 

Check

Remedy

 

 

 

 

 

Is the wireless or wired LAN card inserted?

Check that the wireless LAN card is correctly inserted into the card slot of the projector.

 

 

 

 

"Inserting and Removing Cards" p.17

 

For the EMP-7950

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the network cable connected correctly?

Check that the network cable is connected correctly. If it is not connected or is connected

 

 

 

 

incorrectly, reconnect it.

 

When using the EMP-7950

 

 

 

 

 

connected to a wired LAN, or

 

 

 

when using the EMP-7900

 

 

 

 

 

 

 

Is the access lamp of the wireless LAN card

If the access lamp is off, remove the wireless LAN card and re-insert it.

that is inserted into the projector lit green?

"Inserting and Removing Cards" p.17

 

 

 

 

 

Is the projector displaying the EasyMP

Network connections are disabled while the EasyMP configuration setting screen is displayed.

configuration menu screen?

Close the configuration settings to return to the EasyMP standby window.

 

 

 

 

 

Is the computer ready for LAN card or in-built

Check whether the LAN device is functioning in the Device Manager. For example, "Control panel" -

LAN functionality to be used?

"System" - "Device Manager".