User’s Guide

Adjusting the Screen Image

 

50

 

 

 

3

Press the [ ], [ ], [ ] and [ ] buttons on the
remote control to correct the angle position.

 

You can also tilt the [] button on the remote control to correct the angle position.

4

When the adjustment is complete, press the [Menu]

button on either the remote control or the projector's

 

 

 

 

control panel to close the configuration menu.

 

 

 

 

 

 

 

 

 

 

 

 

Screen

[ / ]:Adjust

[ ]

:Move next

[ESC] :Return (Press 1 second to reset)

TIP

•If you press down the [ESC] button on the remote control or the projector's control panel for one second while the Quick Corner correction screen is displayed, the correction results will be restored to their default values.

•If the message "Cannot move anymore." appears on the screen while using the Quick Corner function, it means that the limit for correction has been reached. Check the following two points.

·Is the projection distance appropriate for the size of the projection screen? p.16

·Is the projector tilted too much? p.45

•If the input signal is interrupted or an image signal that is not supported is input while using the Quick Corner function, the correction value at that point will be recorded and the Quick Corner function will be cancelled.

•When the Quick Corner correction screen is displayed, the following functions will be cancelled.

·E-Zoom function · Real display · Freeze