Epson EMP-7950 available sizes, The position of the, position of the sub-screen, and size for the sub-screenwill be accepted

User’s Guide

Functions for Enhancing Projection 66

2	Tilt the [ ] button on the remote control to change the
	position of the sub-screen.

3	Press the [E-Zoom] button on the remote control to
	change the size of the sub-screen to one of five
	available sizes.

The values given below are the ratios for the sides of the sub- screen when the width and height of the main screen is 1.

Size 1		Size 2		Size 3		Size 4		Size 5
Approx.		Approx.		Approx.		Approx.		Approx.
1/3.4	1/3.2		1/3.0		1/2.8		1/2.7

4	When you press the [Enter] button, the operation
	guide screen will disappear and the display position
	and size for the sub-screen will be accepted.

When the display position and size for the sub-screen are accepted, the operation guide disappears. To cancel the P in P function, press the [PinP] button once more.

TIP

•The position of the sub-screen is memorised, so that the sub-screen will appear in the last position which was set next time the P in P function is used.

•Before setting the display position and size for the sub-screen, you can carry out the following operations to switch the sound output between the main screen and the sub-screen.

·To output the sound for the main screen: Press the [Color Mode] button.·To output the sound for the sub-screen: Press the [A/V Mute] button.

Size 2 is the default size for the sub-screen when the [PinP] button is pressed.