User’s Guide

Turning the Projector On

 

36

 

 

 

Turning the Power On and Projecting Images

TIP

•If Password Protect has been enabled, the Password Protect Release

screen will be displayed when the power is turned on. Type in the password.p.58

•If the "Advanced2" - "Operation Lock" menu setting is set to

"ON", none of the buttons on the projector's control panel will work

except for the [Power] button.p.76

Use the remote control buttons at such times.

PROCEDURE

 

1

Check that the

 

indicator has stopped flashing and

 

 

 

 

 

 

 

 

is lit orange.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

If using the remote control, set the [R/C] switch on the

 

 

remote control to "ON".

 

 

 

 

 

3

Turn the power on for all equipment connected to the

 

 

projector.

 

 

 

 

 

 

For a video source, press the [Play] button at the video source to

 

 

 

start playback if necessary.

 

 

 

 

 

 

 

 

 

 

 

4

Press the [Power] button on either the remote control

or the projector's control panel to turn the power on

 

 

for the projector.

Theindicator flashes green. After a short period it stops flashing and lights steadily, and projection starts.

Wait until theindicator lights green (it normally takes about 30 seconds to change).

Changes from flashing to lit green

Remote control

TIP

•The remote control and projector's control panel buttons will not function while the indicator is flashing green.

•Depending on the configuration menu settings, the message "No Signal." may appear. See "Setting" - "No-Signal Msg." p.86