User’s Guide

List of ESC/VP21 Commands

 

158

 

 

 

USB Connection Setup

In order to control the projector using ESC/VP21 commands via a USB connection, the following preparations must be carried out.

CAUTION

If the power cable is disconnected before cool-down has finished, the communication port will not be changed.

PROCEDURE

 

1

Download the USB driver (USB-COM Driver) from the

 

 

EPSON website to your computer.

 

 

 

 

 

 

The URL is as follows.

 

 

 

http://www.epson.co.uk/support/download/index.htm

 

 

 

 

 

 

 

 

 

 

 

 

2

Install the downloaded USB driver on your computer.

 

 

Read the instructions displayed on the download screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Change the "COM Port" setting in the "Advanced2"

 

 

menu to "USB".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Turn the projector off.

 

 

 

 

 

 

 

 

 

 

 

5

After the cool-downgperiod has finished, turn the

 

 

projector's power back on.

 

Once the projector's power has turned back on, communication via a USB connection will then be possible.