Epson EMP-7950 Preset Function, Saving "Video" Menu Settings, To draw further lines, repeat steps 2 and, "Video" menu from the main menu. Then make the

User’s Guide

Functions for Enhancing Projection 69

TIP

•The thickness and colour of the line cannot be changed by pressing the [Effect] button during the time in between when the starting point is set and the ending point is accepted.

•Straight lines and curved lines cannot be erased individually. All lines will disappear at the same time when the Effect function is cancelled.

4	To draw further lines, repeat steps 2 and 3.
	To cancel the Effect function, press the [ESC] button. The
	pointer icon and the lines that have been drawn will then
	disappear from the screen.

Preset Function

When projecting analogue RGB video signals from a computer, you can change the settings for these signals using the "Video" menu, and up to ten different sets of these settings can be saved.

When the setting values for different resolutions and frequencies that have been made using the "Video" menu have been saved in this way, you can then load these settings and apply them to analogue RGB video signals that are currently being projected just by pressing the [Preset] button on the remote control.

Saving "Video" Menu Settings

PROCEDURE

1	Press the [Menu] button on either the remote control
	or the projector's control panel, and then select the
	"Video" menu from the main menu. Then make the
	settings that you would like to be saved. p.78

Video	Position		Adjust
Audio	Tracking	:	0000
Effect	Sync.	:	0
Setting	Brightness	:	0
				-		+
User's Logo
	Contrast	:	Auto	Manual	Adjust
Advanced1	Sharpness	:	0
				-		+
Advanced2	Color Mode		Select [Presentation ]
About	Resolution	:	Auto	Manual	Select
Reset All		:	[		]
	Preset		Set
	Reset		Execute

[ ]: Select [ ]: Enter [Menu]: Exit