Related references

Input Signal Settings - Signal Menu

Supported Video Display Formats

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

Press the Auto button on the remote control to optimize the image signal.

Try adjusting the image position using the Position menu setting.

Press the Aspect button on the remote control to select a different image aspect ratio.

If you zoomed into or out of the image using the E-Zoombuttons, press the Esc button until the projector returns to a full display.

Check the cables connecting the computer or video source to the projector. Try connecting different cables.

Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)

Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)

Parent topic: Solving Image or Sound Problems

Related references

Input Signal Settings - Signal Menu

Supported Video Display Formats

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

Place the projector directly in front of the center of the screen, facing it squarely, if possible.

If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.

Turn on automatic keystone adjustments using the projector's menus.

Adjust the position of the projector's horizontal keystone slider.

Adjust the Quick Corner setting to correct the image shape.

Parent topic: Solving Image or Sound Problems

155

Page 155
Image 155
Epson EX7235 Pro, EX7230 Pro manual Solutions When Only a Partial Image Appears, Solutions When the Image is Not Rectangular